Want to buy, sell or trade... Damien's garage sale

[Damien]

I realize this is a small forum and won't get much coverage for something like this but this is also a forum that usually has friends or friendly people so I am posting this here even though it is off-topic (so to speak)

I am looking for a truck bed with tailgate for a 1992 Ford F series truck. For this I would like to trade my 50 caliber Thompson Center 'Hawken' muzzle loader. This gun new is 750$ right now. Of course mine is used but I am the only owner and used this gun to (sucessfully) hunt deer. Truck bed should be a dual gas tank model and NOT for a 6 wheeled 'dually', little to no damage or rust. I believe the years 1987 to 1997 will all fit.

Alternately I would like just a tailgate for the same truck for which I could pay cash or trade though I would want some $$ in addition to the tailgate if trading for the gun.

Would also like a spare tire rack for same truck.

On to the garage sale

please make an offer on anything you like, most of this stuff is old and I am aware that it isn't worth much especially when you add in any shipping cost

If the above trade is not feasible I would sell the 50 caliber Thompson Center 'Hawken' muzzle loader for cash

As for Apple/Mac stuff.... I have the following stuff as well, that I would sell or trade

1 Empty Burly, 2 bay beige. Has PSU and scsi U320 case cable, case cable is and end of chain cable only. Has internal terminator/one HD68 pin external connector. No drives in this one. One vented bezel and one missing bezel

1 Burly 2 bay beige. With pair of U320 Seagate 15K 18gb Cheetahs Has PSU and scsi U320 case cable, case cable is and end of chain cable only. Has internal terminator/one HD68 pin external connector. Vented bezel with extra fans. (Ultimate HD coolers from MacGurus) Ready to run

1 very short 68pin U320 case cable

1 Ext 68pin U320 external terminator

1 Apple branded 4gb Western Digital ATA drive

1 pair of Seagate ST318405LW Cheetah drives 18.4gb 10k rpm

1 pair of Seagate ST318406LW Cheetah drives 18.4gb 10k rpm

1 74gig Seagate Cheetah 10k 1/2 height drive ST173404LW

1 180mhz 604 daughter card for legacy Macs (Powermac 7300, 7500, 7600, 8500, 9500, 8600, 9600)

2 XLR8 zif carrier cards with processors on board. 2 software CD's 1 manual, speed unknown will provide numbers if interested

1 3 ft 68pinHD U320 LVD ext scsi cable

1 6 ft 68pinHD U320 LVD ext scsi cable

1 3 ft 68pinHD to VHDC U320 LVD ext scsi cable

1 6 ft 68pinHD to VHCD U320 LVD ext scsi cable

10 72 pin sims (one 16mb, one 4mb, one 1mb, one 8mb, four 4mb in matched pairs, 2 matched 32mb)

168 pin dimms for legacy mac one matched pair 8mb, one mismatched pair 16mb, five matched Kingston sticks size unknown will provide numbers if interested

one matched pair video ram for legacy mac

6 pair 30 pin simms 1mb each for Quadra's, Centris etc.

One pair matched DDR PC2700 333mhz 128mb dimms

Adaptec 2930 CU scsi card Mac version no L bracket

OrangeMicro Grappler 930U scsi card

ATTO UL2D Ultra2 scsi card

Asante PCI ethernet card 100baseT I think.

Bear in mind I have little if any way to test any of this stuff. But back in the day I did test it all before it went into storage and it all worked. If I can still test it I will just ask.

[billbo]

Billbo here,
been a while since I've lurked around here and saw some recent activity in the ol'For Sale Forum and caught your post.
I'm interested in most of your old SCSI gear:
1 Empty Burly, 2 bay beige. Has PSU and scsi U320 case cable, case cable is and end of chain cable only. Has internal terminator/one HD68 pin external connector. No drives in this one. One vented bezel and one missing bezel

1 Burly 2 bay beige. With pair of U320 Seagate 15K 18gb Cheetahs Has PSU and scsi U320 case cable, case cable is and end of chain cable only. Has internal terminator/one HD68 pin external connector. Vented bezel with extra fans. (Ultimate HD coolers from MacGurus) Ready to run

1 pair of Seagate ST318405LW Cheetah drives 18.4gb 10k rpm

1 pair of Seagate ST318406LW Cheetah drives 18.4gb 10k rpm

1 3 ft 68pinHD U320 LVD ext scsi cable

1 6 ft 68pinHD U320 LVD ext scsi cable

1 3 ft 68pinHD to VHDC U320 LVD ext scsi cable

1 6 ft 68pinHD to VHCD U320 LVD ext scsi cable

Shoot me a price billbohughes AT netscape DoT net

THX,
-B

[Damien]

You've got mail

[Damien]

sold stuff... updated list

[brad_owens]

Damien, do you still have a 604e cpu? I need something for an old 7500.

thx,

brad
---------

1 180mhz 604 daughter card for legacy Macs (Powermac 7300, 7500, 7600, 8500, 9500, 8600, 9600)

[rwm]

I think I do if Damien does not. Probably from a 7500 would be my guess.

[Damien]

Damien, do you still have a 604e cpu? I need something for an old 7500.

thx,

brad
---------

Yeah I have it. You might get better shipping from Randy though as he is several states closer to you than I am :-) Unless I have other stuff you want

Let me know what to do..

[brad_owens]

ok, I just sent you both an email to your @macgurus email address...

[rwm]

My outgoing mail is screwed up. I'd get Damien's because I need to find and identify what mine is or it's MHz. If I had to guess I don't remember having a faster one. It might even be a 604 not a 604e I can post back here if needed.

[brad_owens]

don't sweat it, randy; damien and I just did the deal...the 7500 lives! /fingers crossed

brad.
--------

My outgoing mail is screwed up. I'd get Damien's because I need to find and identify what mine is or it's MHz. If I had to guess I don't remember having a faster one. It might even be a 604 not a 604e I can post back here if needed.

[rwm]

No problem. Post back if you need parts from that vintage. I have a few not a lot.