Results 1 to 2 of 2

Thread: eMac 1g - Strange distorted chimes at startup

  1. #1
    Join Date
    Apr 2001
    Location
    Albury, NSW, Australia
    Posts
    135

    Default eMac 1g - Strange distorted chimes at startup

    Hi all
    I had a problem with this eMac 1gig, wouldn't recognise 2 x 256M ram chips. I replaced with two new sticks which made the machine run OK but profiler still says 256MB with one bay empty. Also, now on start up, the machine gives out an awful series of distorted "chimes"???

    Any clues?

    Bernard
    The Meek Won't Want It!

  2. #2
    Join Date
    Feb 2001
    Location
    on the landline, Mr. Smith
    Posts
    7,787

    Default

    Hmmmmm.....

    Let's see if Rick has any insight about possible connections to the RAM change. I would consider putting in a support call to the RAM supplier to let them know what happened. Are you sure it is good RAM from a good source? Right Spec for that machine?

    You might also taking out one stick at a time to see if either stick is causing the issue......or if either RAM slot is the culprit. Reseating to be sure they are in firmly is always good to do too.

    Sometimes RAM slots seem to go bad. May be a deeper problem, like the PCI bus, the memory controller or something else on the logic board. It happens.

    At work we have a G4 PowerBook with one bad RAM slot. Leave the slot open, and Book is fine; any stick in the lower slot, and it won't boot.....won't even pass the default RAM test and beeps at me.

    Heat, static, flex, power surge, age.....I can't say why.

    Cheers.
    "Imagine if every Thursday your shoes exploded if you tied them the usual way. This happens to us all the time with computers, and nobody thinks of complaining." -- Jef Raskin

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •