Results 1 to 5 of 5

Thread: PC PSU on G4 sawtooth? possible ?

  1. #1
    Join Date
    Jan 2005
    Posts
    115

    Default PC PSU on G4 sawtooth? possible ?

    Hi,
    My G4 Sawtooth PSU is dead. I was wondering if I could buy a PC PSU to replace it. I looked for information on Internet, but all the information I found was for G4 QS and later with a 22 or 24 Pins PSU and 28 V output.

    My G4 psu has only 20 pins like PCs.

    So is it possible to switch without any mods?

    Specs PSU :
    Delta DPS-200pb-110 b rev:00
    G4 Sawtooth 400
    Last edited by zetoune; 10-22-2006 at 12:52 PM. Reason: PSU specs:

  2. #2
    Join Date
    Jan 2002
    Location
    NW Montana
    Posts
    8,197

    Default

    Check if these threads help.

  3. #3
    Join Date
    Jan 2005
    Posts
    115

    Default

    Thanks.
    So it's possible but I can't find schemas to swap wires anywhere.

  4. #4
    Join Date
    Jan 2005
    Posts
    115

    Default

    Ok I found it...
    Everything is there: http://www.xlr8yourmac.com/systems/A...X_case_pg2.htm

    Thank you

  5. #5
    Join Date
    Feb 2001
    Location
    on the landline, Mr. Smith
    Posts
    7,787

    Default

    Let us know how it works out.

    Luck!
    "Imagine if every Thursday your shoes exploded if you tied them the usual way. This happens to us all the time with computers, and nobody thinks of complaining." -- Jef Raskin

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •