Results 1 to 2 of 2

Thread: Dead channel on Tempo-X eSATA8

  1. #1
    Join Date
    Feb 2006
    Posts
    1

    Default Dead channel on Tempo-X eSATA8

    I just set up my hot swap Burly 8 Bay and connected it to the Sonnet Tempo-X eSATA 8. After a bit of fiddling with eSATA cables I can see all the drives in Disk Utility except 1 ( also 7 green LEDs,never eight). Regardless of what i plug into channel 1 on the Tempo-X nothing shows up. So I am sure that all my cables and connections are good, it seems to be channel 1 is dead. Is this just a bad card or does anyone have any ideas. I did create a stripe set with the 7 drives and used them a bit. AJA benchmarks at around 390 MB/sec on the empty array, which is nice.

    Tony

    Dual G5
    OS X-10.4.5
    4 GB RAM
    AJA Kona 2

  2. #2
    Join Date
    Aug 2001
    Location
    Grangeville, ID USA
    Posts
    9,119

    Default

    Two things to try. First is do a firmware update on the card. This usually fixes the problem. Here's the Updater

    Also do a PRAM reset. Hold COmmand+Option+P+R keys for three start up chimes.

    Rick
    molṑn labe'
    "I am a mortal enemy to arbitrary government and unlimited power. I am naturally very jealous for the rights and liberties of my country, and the least encroachment of those invaluable privileges is apt to make my blood boil."
--Ben Franklin

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •