Results 1 to 2 of 2

Thread: Raid Problem

  1. #1
    Join Date
    Nov 2001
    Pierre, SD USA


    I just ordered a couple cheeta drives, cables and terminator to build an internal raid in a G4 Server box. After unpacking the stuff, I think I may have a problem. I am putting in two drives and, after reading the instructions on this site, I ordered a cable with two connectors plus on for the SCSI card, total three. What I don't know is where to hook the terminator. Do I need a cable with 4 connectors or am I just missing something.

    Lost in the Heartland.

  2. #2
    Join Date
    Aug 2000
    Toronto, Ontario, CANADA



    Yeah - the terminator usually hangs on the end of the ribbon cable esp since, I believe, that on the LVD drives, you can't set it on the drive itself...

    sounds like you would need a 4 connector cable ...

    Adapter - drive 1 - drive 2 - terminator...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts