Results 1 to 11 of 11

Thread: TiBook 800 won't mount CD's

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Apr 2002
    Location
    Toronto, Ontario, CANADA
    Posts
    437

    Default

    Hi all

    Funny situation here
    TiBook 800 / 10.2.4 / was working fine until this weekend. I couldn't get a CD out of my slot drive so I had to go into Open Firmware to eject the CD (i.e. Command-Option-O-F 'eject CD / mac-boot

    Now I can't mount any CD's at all..
    Any ideas? I can put the CD's in, the computer thinks for a while, and then it spits it back out at me..

    The drive shows up under Profiler,.. I did go back into Open Firmware and did a reset all but it still messes up..

    Disks are fine in other computers.

    Thanks

    Chris

  2. #2
    Join Date
    Jan 2001
    Location
    Mobius Strip
    Posts
    13,045

    Default

    Doc,

    I read about that on OSXFAQ (and there is a link to a tech note) and no "ill effects" from using, therefore, perhaps there is something physical to this? like dust bunnies or motor? My first thought was that somehow you saved that command to a file that OF loads (Bootx or tbxi).

    General trouble - shoot the computer or else - rebuild the directory, repair boot blocks, Safe Boot, reinstall 10.2.4 combo, repair permissions, boot into OS 9 to be sure it works there...

    Also, Apple KB 88215

    Disk Utility can be used to eject as well as terminal (diskutil so its the same) w/o resorting to OF or booting. I assume that "command + period" had no effect (should eject CDs also). Was this one of those audio CDs (Celine's is reported to cause trouble) that refuse to eject? Wasn't there something about some CDs that can actually damage a SuperDrive or something? truth?

    - G.

    [This message has been edited by Gregory (edited 10 March 2003).]

  3. #3
    Join Date
    Apr 2002
    Location
    Toronto, Ontario, CANADA
    Posts
    437

    Default

    Just reinstalled the OS X 10.2.4 combo update - interestingly, it seems to have made my machine a bit more responsive...

    Time to test the CD...

    The motor seems fine since it pulls it in and I can hear it spinning and sort of running.. Hmmm

    Chris

  4. #4
    Join Date
    Apr 2002
    Location
    Toronto, Ontario, CANADA
    Posts
    437

    Default

    I'm thinking the drive unit is dead... it sucks it in, tries to spin it up.. I sort of get something and then it kicks it back out...

    Ughhh

    Chris

  5. #5
    Join Date
    Apr 2002
    Location
    Toronto, Ontario, CANADA
    Posts
    437

    Default

    Darn it all - it would appear to be that the drive has died... ugh - and I've only had this machine since last July...

    Time to call it in...

    Shoot...

    Chris

  6. #6
    Join Date
    Apr 2002
    Location
    Toronto, Ontario, CANADA
    Posts
    437

    Default

    I checked some of the powerbook discussions and there was a nice thread about basically the same thing. I don't have any DVD's at home to test it out but I've tried Mac CDs/PC CDs/Audio CD's and nothing works, even when I go back into 9.2.2..

    Drat - I wonder how much this is going to cost...

    Chris

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •