Results 1 to 5 of 5

Thread: memory

  1. #1
    Join Date
    Jan 2001
    Location
    Hubert,NC, USA
    Posts
    105

    Default

    Somewhere on a 68 pin DIMM there's a number that tells you whether it's 60 or 70 nanosecond. Where is it? Thanks...

  2. #2
    Join Date
    Sep 2000
    Location
    Boston MA, USA
    Posts
    168

    Default

    I believe that the center chip will have numbers on it, one of them ending in -60, -6, 6, or -70,-7,7. 6=60ns 7=70ns

    ~~~Eric~~~

  3. #3
    Join Date
    Oct 2000
    Location
    Colorado Springs, CO
    Posts
    936

    Default

    I assume you mean 168 - pin? All the actual memory chips should have that marking on it. In my experience, it is only the center chip (controller?) that doesn't have the marking on it.

    Eric has the rest of it down pat. Heck, maybe he's got it all down pat, but my sticks all have the markings on the individual chips all over the module.

  4. #4
    Join Date
    Jan 2001
    Location
    Hubert,NC, USA
    Posts
    105

    Default

    Thanks to both of you...Redress

  5. #5
    Join Date
    Sep 2000
    Location
    Boston MA, USA
    Posts
    168

    Default

    DSMan, I think that you're right... I got my memory squared away with so long ago that I haven't looked at them again! :-)

    ~~~Eric~~~

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •