PDA

View Full Version : Cheetahs are here!



Damien
11-30-2001, 10:49 PM
Ok

I have my brand new X15's A pair of 318452LW's on an ATTO Ultra 160 Dual channel card. 18.35 gig each striped with OS X

Here are some rough timed tests to dupe a file comparing my Cheetah Raid to my IBM ATA66 60gig 7200rpm stock drive.

625.8MB file

Cheetah Raid 14 seconds to duplicate
IBM 40 seconds

82MB file

Cheetah 2.9 seconds
IBM 7 seconds

These times are rough because I need a benchmarking utility that runs in OS X

Anybody know of one?

ricks
11-30-2001, 11:18 PM
ATTO just released one. Have not tried to download it yet.
Rick

Damien
12-01-2001, 06:57 AM
IS there a downloadable?

I saw your other post and it mentioned an extremely high price......

ricks
12-01-2001, 12:07 PM
The other post is for the full OSX RAID package. Traditionally ATTO has given away the utility package via downloads. The OSX RAID page at ATTO lists a new Benchtest utility, the old version definately would not work right when testing drives in OSX via classic.

I just unsuccessfully tried to find a link for the utility, must not be set up at ATTO yet.

Rick

TZ
12-01-2001, 02:06 PM
There is a 2.7 of ExpressPro-Tools.

Running bench test under Classic actually works, not sure how accurate.

PR: 200MB/s SR: 131MB/s
PW: 124MB/s SW: 35MB/s

ATTO UL3S (1.6.5a) w/ 2G X15 (non-RAID)

I just bought an Atlas 10k 3 to compare - very close to the 2G X15 except for one small matter. I had bought the Atlas for its low noise 3.1 db vs. 3.7 only it has a near inaudible high pitch that drove me crazy, like a hum in the ears. I wanted to save $150. Now I'll use it for off-line weekly backups and wait until I can afford another X15.

The pursuit of perfection is impossibly expensive!

Gregory

[This message has been edited by Gregory (edited 01 December 2001).]

ricks
12-01-2001, 03:56 PM
Gregory,
I tried running the Express tools 2.7 version in classic and my numbers were non-sensical to say the least. I did tests on both Hardware raids and non-raided drives that the performance was known in OS9. Now, I would expect the protocols and I/O to change with the new OS, but I was getting huge upward read gains on the tests and 10 to 20 percent of the OS9 write performance.

I think that should be the reason why ATTO rewrote the bench program to go along with the OSX RAID software.

Rick

Damien
12-01-2001, 10:28 PM
Well I hope that ATTO gets the new bench util up soon I am dying for an accurate test......