PDA

View Full Version : Sun Monitor Question



despaxas
09-24-2002, 12:25 PM
I have always thought that Sun monitors were not compatible with macs. Well, in a local goodwill computing store I found an apple 15pin monitor cable with a Sun monitor connector on the other end. Curious, I bought it and a cheap 20" Silicon Graphics monitor to check it out. It didn't work, but what then is that type of cable used for? To connect an apple monitor to a Sun workstation? If anyone has any ideas, I'd appreciate it.

fwiw, the Silicon Graphics monitor has the same button layout, CRT, and case as my Apple 20".

Dogstarman
09-24-2002, 07:53 PM
Tons of times, workstation monitors are fixed-sync varieties of very similar multi-sunc brethren. I have 2 20" Sun GDM-20D10 monitors running on my Macs. They have Sun's wacky 13W3 connector. In my case, the adapter needs to have a 2 microFarad capacitor soldered between 2 wires in the adapter to allow it to sync at all. Your case will be different I am sure.

Here (http://home.iae.nl/users/leibbran/sunmon/sunmon.htm) is the Sun conversion page. And here (http://www.monitorworld.com/) is a decent place for monitor conversion info.

Hope this helped a little. Not sure what the adapter is for. Even Apple borrowed Sun's 13W3 for their Portrait Display. Companies find odd uses for each others technology. Wish I could help there.

[This message has been edited by Dogstarman (edited 24 September 2002).]

[This message has been edited by Dogstarman (edited 24 September 2002).]

despaxas
09-25-2002, 06:15 PM
Thanks, those sites are great. It is a GDM-20D11, and according to the site, a multi-sync monitor. More importantly, it states it is a sync-on-green type. I connected it to a built-in Mac monitor connector and a Proformance 3 with SVGA adaptor, but maybe I'll dig out a Twin Turbo with sync-on-green and give that a try before doing anything else. Thanks again.