PDA

View Full Version : Upgrades



mbeck
03-25-2001, 04:45 PM
Now that I understand I have one of the troublesome PTP250 motherboards used in the last run and you all have solved the problem, I hope you can help with my decision to upgrade. I wanted to do your G4 upgrade but it sounds like that is not possible with my motherboard at this time. I will settle for a G3 upgrade at this time but will the XLR8 work with the Adaptic SCSI card I have installed --the adaptic 2940UW and if it will work what firmware should I have installed. As an after thought --will OSX run with the G3 upgrade.
Thanks
cmb

Louie
03-25-2001, 07:55 PM
The PTP 250 are not really troublesome, there were tweaked by Power CC and the documentation was buried. It took XLR8 a little reverse engineering to get the Carrier card the work, but that was a long time ago.

The Adaptec card will work as well with the upgrade as it works anywhere.

This http://homepage.mac.com/RyanRempel/OldWorld/Instructions.html is the best answer so far to your OS X question.

If you get the G3 upgrade get the Carrier ZIF not the MPe ZIF.