Burly 2 Bay USB3.0 eSATA Enclosure
Supports up to 2 x SATA or SSDs - mixed drives ok- USB 3.0 Port - 5Gb/sec
- eSATA Port - 6Gb/sec
- Built in RAID controller for RAID0 or 1 (required for Windows RAID)
- Built in 80 Watt Auto Switching power supply (90-230 Volt)
- Internal 80W Power Supply 100-240V AC input
- OS independent - No Drivers
- Dimensions: 7"w x 11.3"d x 6.5"h
- Cooling: 1 external 80MM and 2 internal 40MM 12 volt fans
Standard Trays are simple and low key. Personally I like these trays without bells and whistles. Each tray has built in drive power and drive activity lights, so you know which drives are working and which aren't. Drive tray fully surrounds drive when out of the Burly. |
 |
Trayless Bays - Use no drive trays at all. Slip your bare drive in and close the door. Simple system that works. Be aware, you are handling a bare drive when out of the bay. Antistatic drive boxes are recommended when drives are stored. |
 |
Hotswap trays protect your drives when out of the Burly by completely surrounding them in an aluminum box. You can label them, carry them with you, or stack them on a shelf.
Standard Drive Trays  |
Open Trayless Bay  |
Stackable Storage Boxes available below  |
AJA Speed test connected USB 3.0 to a Mac Mini. Drives are a pair of Seagate HDD14 2TB drives in a Disk Utility software RAID0.
- Burly 2 Bay USB 3.0 and eSATA Enclosure
- All drive mounting parts needed for 2 drives
- Your choice of installed and tested drives
- 6 foot USB 3.0 AB cable
- 6 foot power cable
