Step 7: Disassembly Complete



The MAP5021 Dual-Bay Burly Enclosure disassembled.

Fifty-pin IDC PVC Ribbon Cabling on the left. Four Cable Connector screws on the right.
Enclosure in the rear, with all remaining internal cables nicely routed to the sides.

RAID Tutorial by magician. Photos by Frank T.

This is How It Looks

1. This page depicts the Burly Enclosure with the 50-pin PVC cabling removed. The four cable connector screws are grouped to the right.

2. As mentioned, all remaining internal cables are nicely routed to the sides of the enclosure chassis and tied off. You can use rubber bands to keep them out of the way.

The Gurus Certify
These Instructions Work