Step 13: Connectors



Make sure your Granite cable properly screws into the
68-pin ribbon cable connectors in the MAP5021 Dual-Bay Burly Enclosure.

Screw them in carefully, and do not over-tighten. The barrel screws are soft metal. They can get mushed.

RAID Tutorial by magician. Photos by Frank T.

Testing the Connections

1. Make sure the barrel screws on your Granite cable interface properly and screw tightly into the barrel connectors on the external ribbon cable connector. Go finger-tight with these. We use a little flat-bladed screw driver to get them nice and snug.

The Gurus Certify
These Instructions Work