SATA CABLES

MacGurus has a full assortment of premium SATA cables and adapters for Macs and PCs. Internal cables, shielded external cables, power adapters and enclosure parts. These are the highest quality you can get. All cables support SATAI and SATAII specification.

---

270 degree SATA cable
best for Mac Towers.

Super low profile for clearance in the tightest places. The 270 degree connector on one end faces UPWARDS when installed on a drive. Perfect for mounting on the floor of all Mac hinged door towers: The B&W, and Sawtooth through Quicksilver G4’s. The correct cable for the MDD tower as well.

Useful in many PCs where a downwards facing low profile end is needed.

Comes in 12 inch, 18 inch and 39 inch lengths. The best cables you can buy. Supports SATAI and SATAII.

270 degree cable shown connected to a Barracuda
with a SATA Power adapter.

SATA Cable 270 Degree 12 inch MY2106 $5.35

SATA Cable 270 Degree 18 inch MY2102 $6.95

---

90 degree SATA Cable

Non-Latching

Installed on Drive

Latching Cable

90 Degree one end, straight other end. Same cable as the above 270 degree except the 90 degree cable end faces down when connected to the drive. Many drive locations or SATA host card adapters can use these cable to clear obstructions. Please check your specific computer drive and host connections to determine your needs. Available in 12 inch, 19.5 inch and 36 inch lengths. SATAI and SATAII support.

Sata Cable 90 Degree 30cm (12in) MY9012 $5.40

Sata Cable 90 Degree 50cm (19.5’’) MY9018 $6.95

Sata Cable 90 Degree 1 meter (36’’) MC9036 $7.95

Sata Cable 90 Degree 50cm (19.5’’) Latching ML901850L $7.95

---

Internal to External SATA Port Adapter

PCI 8 port SATA adapter. Connect your internal host card(s) to external devices. This adapter is an inch deep. Has eight internal sata connections attached directly to 8 external connections. The connectors are TypeA on both sides.

You can use 12 inch straight SATA cables listed below to connect the SATAPort to the host card.

Use Shielded External cables with TypeA connectors on the SATAPort end.

This adapter is basically just 8 pairs of back to back connectors and will support SATAI and SATAII throughputs.

Internal to External PCI SATA Port Adapter SATAPort $24.99 8 Port riser card. In Stock. Shipping

---

Straight both ends SATA cables

Non-Latching

SATA jumper cable. Straight on both ends.

Best cable for connecting to the 8 Port Internal to External Adapter Port. SATAI or SATAII capable.

12 inch Straight SATA Jumper Cable MC2107 $3.95 12 inch internal jumper

18 inch Straight SATA Jumper Cable MC2109 $4.95 18 inch internal jumper

---

SATA 'Y' power Adapter cable.

This Power Adapter Cable converts a 4 pin molex plug into two 15 pin SATA plugs on 6 inch leads. New Maxtor DiamondMax10 and MaxlineIII as well as Seagate Barracuda drives only have 15 pin SATA power and require this adapter.

Note: Not necessary for Barracuda or Maxtor drives installed in G5’s which already have 15 pin power connector.

SATA Y Power Adapter Cable 270 degree MC2105 $5.95 cable has 270 degree ends that angle upward from drive for minimum clearance installations

SATA Y Power Adapter Cable 90 degree MC2110 $5.95 able has 90 degree ends that angle downward from drive for minimum clearance installations

---

1 Meter Shielded External Data Cable

Solving the interference problems sometimes seen with using data cables meant for internal use, these shielded cables are the right way to hook up your external SATA enclosure. Triple shielded with an extra heavy PV outer sheath for tough wear. These cables are very flexible. These set the standard for external SATA cable needs. These cables are Type A to Type A connections.

 Meets SATAI and SATAII specification.

Shielded External SATA Cable 1 Meter MCJ39EX $14.95 SATA TypeA on both ends.

---

1 and 2 Meter eSATA to SATA Type A Shielded External Data Cable

These cables are for connecting eSATA device to Type A Host card. Or attaching an eSATA Host Card to a standard Type A device.

SATA Type A is the same connection as that of your hard drive. All internal connections are Type A. Meets SATAI and SATAII specifications.

Click Image for greater detail

1 meter Shielded External SATA w/ Type A to Type B (eSATA) MCJ39EX-AB $18.95 For connecting Type A host card to Type B (eSATA) enclosure OR Type B host card to Type A enclosure.

2 meter Shielded External SATA w/ Type A to Type B (eSATA) MCJ78EX-AB $21.95 For connecting Type A host card to Type B (eSATA) enclosure OR Type B host card to Type A enclosure.

---

1 and 2 Meter eSATA to eSATA Shielded External Data Cable

These cables are for connecting eSATA device to an eSATA Host card. Both ends are the same. These cables support 3Gb/sec SATAII specification as well as SATAI.

Click Image for greater detail

1 meter Shielded External SATA w/ Type B to Type B (eSATA) MCJ39EX-BB $18.95 For connecting Type B host card to Type B (eSATA) enclosure OR Type B host card to Type B enclosure.

2 meter Shielded External SATA w/ Type B to Type B (eSATA) MCJ78EX-BB $21.95 For connecting Type B host card to Type B (eSATA) enclosure OR Type B host card to Type B enclosure.

---

Single and Double Cable PCI brackets

Connect your internal SATA host to external PCI ports giving a clean, safe and sturdy attachement for external cables. External connector in TypeA or eSATA. SATAI and SATAII capable. All internal connecotrs are TypeA

 

8 in. Single eSATA Cable with PCI Bracket MC08PCIS-eSATA $10.95 1 x 8 inch cable, eSATA external connector.

12 in. Single eSATA Cable with PCI Bracket MC12PCIS-eSATA $13.95 1 x 12 inch eSATA cables w/ eSATA external connector.

12 in. Dual eSATA Cable with PCI Bracket MC12PCI-eSATA $17.95 2 x 12 inch eSATA cables w/ eSATA external connector.

18 in. Single eSATA Cable with PCI Bracket MC18PCIS-eSATA $14.95 1 x 18 inch eSATA cables w/ eSATA external connector.

18 in. Dual eSATA Cable with PCI Bracket MC18PCI-eSATA $20.95 2 x 18 inch eSATA cables w/ eSATA external connector.

---

SATA Male to Female jumper cable and Centronics opening Bracket

Convert your old SCSI enclosure to SATA! The jumper cable attaches with screws to the Centronics bracket which is sized to fit the Centronics opening in the back plane of most SCSI drive enclosures. Use the 12 inch and 18 inch versions to convert most multi-drive enclosures. The 6 inch cable is useful in smaller single drive enclosures.

These cables are SATAI and SATAII capable. Read description for connector type. Both TypeA and eSATA external connectors are available for the femail chassis mount end. Male end is always TypeA which matches internal host card or hard drive connectors.

Cable Bracket for Centronics AD2101 $5.95

Dual Cable Bracket for Centronics AD2102 $7.95

8 in Chassis mount eSATA Cable male-female MC08MF-eSATA $9.95 Use for smaller single drive enclosures. eSATA connector

12 in Chassis mount eSATA Cable_male-female MC12MF-eSATA $12.95 Best for multi-Drive enclosures

18 in Chassis mount Cable_male-female eSATA MC18MF-eSATA $13.95 eSATA external connector.

18 in. Single eSATA cable on centronics bracket MC18CBS-eSATA $15.95 1 x 18 inch eSATA cable w/ eSATA external connector.

---

SATA Power and Data Combined Drive Cable

A combined power and data cable assembly for the cleanest installation possible. More secure, this cable connects to the 7 pin data and 15 pin power connector on the drive and has separate 18 inch data cable and 8 inch power cable to 4 pin molex connector. Available with TypeA external connectors ONLY.

MC18DP - NOW IN STOCK

Cable SATA Data and Pwr combined 18 in. MC18DP $9.95 Combined cable for cleaner and more secure connection